How to make Bau Cua dice with paper is not easy if you haven’t been specifically guided through each step and process.
However, this is not too difficult a task, requiring a lot of experience, as even beginners can successfully create their own 6-sided Bau Cua dice after a short period of practice.
Below is a compilation of detailed methods for making Bau Cua shaking game dice with paper and foam, along with a specific instructional video for your reference.
Instructions on how to make Bau Cua dice with paper
Making Bau Cua dice with paper is not as difficult as many players often mistakenly think, but it’s also not so simple that anyone can succeed.
Currently, there are many pre-designed Bau Cua dice available on the market, but players still prefer to use homemade ones to ensure a safer and more effective cheating process.
Without making you wait any longer, here are the detailed steps:
Step 1: Prepare the paper
The first thing you need to do is prepare a piece of thick, water-resistant paperboard to ensure good durability after long-term use.
Divide the paperboard into equal squares with dimensions of 8.5 cm x 8.5 cm.
After obtaining the paper with the correct dimensions, continue using a pen and ruler to divide it into 9 squares with dimensions of 2.5 cm x 2.5 cm.
Note: Leave a 0.5 cm margin on all four edges to facilitate gluing in the next steps.
Step 2: Cut the paper
After obtaining the 8.5 cm x 8.5 cm paper with evenly and neatly drawn squares, you will cut it into a special shape corresponding to the 6 faces of the Bau Cua dice.
The detailed cutting method is specifically guided in the video, but to make the shaping more effective, you need to remember the following details:
- Cut along the ink line drawn by the pen instead of cutting beside the line.
- Players need to ensure precise cutting along the lines to help the Bau Cua dice remain balanced.
- At each corner, you should round the edges to make assembly easier.
Step 3: Assemble the Bau Cua dice
After completing step 2, you will now have a piece of paper with a special shape corresponding to the 6 sides of the dice.
At this point, all you need to do is fold them together to form a cube and use glue to secure it.
The glue should be evenly applied to the edges around the 2.5 cm x 2.5 cm squares to ensure the sides are tightly bonded together.
You should check out how to play Bau Cua Ca Cop, so you understand that the dice will be shaken continuously. If the dice are assembled carelessly, their durability will not be high.
Step 4: Attach the images
Once you have the 6-sided Bau Cua dice made from paper, the next step is quite simple and doesn’t require as much skill or meticulousness as steps 2 and 3.
Specifically, players proceed to attach images of the Bau, Cua, Tom, Ca, Ga, and Nai symbols to each face of the dice.
Step 5: Test play
Finally, you just need to try playing to feel the uniformity and solidity of the dice you just made. You can listen to the dice when shaking to see if the sound is muffled and make adjustments.
Instructions for making dice using foam
Besides making dice with paper as mentioned above, you can completely choose other materials like foam to create a basic 6-sided dice.
Compared to paper, making dice from foam is much simpler because the player doesn’t need to cut and paste too much.
Step 1: Shape the dice
When shaping the dice using foam, you just need to skillfully cut it into a cube with any desired size.
However, to ensure effectiveness when shaking, a cube with dimensions of 2.5 cm x 2.5 cm x 2.5 cm is the most common.
Players can trim the edges of the cube to create a softer, more elastic feel when shaking, or leave it in its original shape.
Cutting the foam is very important and requires high precision to ensure the faces are even with equal chances of appearing.
Step 2: Attach the images
After successfully shaping the dice, the player will proceed to attach the images of the symbols gourd, crab, shrimp, fish, chicken, and deer to each face of the dice.
Note: You need to attach the images in the correct order instead of randomly placing them on the faces.
Currently, sticker sets are sold everywhere on the market, especially in gambling, dice, and rigged dice shops.
If you can’t find pre-made stickers, you can also choose to print them at stores. If you understand how to calculate the probability of dice, you can proactively attach the images as you wish, thereby manipulating the results.
Step 3: Check
To ensure the quality of the dice, the player will use the tool they just completed to play and shake it for testing.
If you detect an error, such as the dice always giving the same result, you need to check the uniformity between the faces and fix them as soon as possible.
Thus, with just a few simple steps, players can immediately have their own self-made foam dice. If you want to install additional rigging devices like vibration sensors or cameras, you just need to skillfully place them in the middle of the foam piece.
Conclusion
I have shared with you in detail how to make dice using paper with each specific step and process.
Although it’s not too difficult, to successfully create it, the player needs passion, perseverance, and high meticulousness.
Depending on your conditions, you can choose to play with paper, foam, or mica plastic dice that are readily available on the market. Don’t forget to check out tips for playing dice on your phone that are currently trending, helping you win more easily, which we have collected.
